Alternatively, you can also use a store-bought watering globe or aqua globe.
Draw a line on the bottle with a permanent marker, right at the water level. Check back after a few hours (or even a whole day). If the water level is below the line you drew, the water is draining properly. If the water level has not changed, something might be blocking it.
This method will keep your plants watered for up to a week.
The string must be able to hold water. If it can’t hold water, this method won’t work. [7] X Research source
If you have a few plants that don’t require a lot of water, such as succulents, you might be able to get away with a single jug for 2 or 3 plants. Even if the jug does run out of water, your plants may still survive because of their water-retaining properties.
Place the holes on 1 side of the bottle. When you put the bottle into the soil, turn it so that the holes face the plant you are watering. It’s better to start with too few holes than too many. You can always add more holes later if there aren’t enough, but it will be difficult to cover up holes that are already there.
Make a mark on the bottle with a marker, right at the water level. Check back after a few hours. If the water level has not changed, loosen the cap a little. If the water level has dropped significantly, tighten the cap.
Consider using some homemade watering systems as well. This way, your plants will rely on the homemade watering systems, and all your neighbor will have to do is refill the bottles when they get empty.
An example of specific watering instructions would include: Give this plant 0. 5 c (120 mL)of water every Saturday evening. An example of specific care instructions would include: Tip the excess water out of the basil dish daily. [12] X Research source
Leave the light on, if you can.
