This is also a great option if your desk is in the middle of your room. The cable catch will be visible from one side, but your wires won’t be visible from the front of the desk!
You can pair this solution with a cable management tray, wire covers, or a cable management box.
Keep in mind that the cord protector might be a tripping hazard if you have it in the middle of the room.
You’ll still have wires extending from the ends of the management tray, but the tray holds the bulk of the cords so you can’t see them. If your compartment is wide enough, you can also hide a power strip or surge protector in it!
You can probably pull off the power strip once or twice if you need to move it, but the more you do this, the weaker the adhesive will be.
You can find sleek black cable management boxes or simple white boxes with cork lids, for instance.
If you really want to organize your cables, buy cable ties that are pre-labeled. Then, wrap the appropriate cable around each wire.
For a simple utilitarian solution, use Velcro strips instead of the sleeves. These are a little easier to quickly remove and reapply as needed.
You can also use smaller binder clips to gather thin wires. It’s totally fine to clip wires together without securing the clip to your desk or table. Besides this, you can use power bridges to hide cables with 120 voltage on the wall. [10] X Research source For low voltage wires, you can drill a hole and bring it through the wall, depending on your electrical code. You can use decorative faceplates. [11] X Research source If you do not want to drill holes in the wall, you can put the wires on the sheetrock and use wire tracks that you can paint. [12] X Research source
