To get rid of excess wire, snip off the free ends with the cutter on the pliers, then bend and fold any remaining wire down and out of the way.
Single ties are usually suitable for rebar intersections made on the ground. For vertical intersections, such as when forming a concrete wall, use a stronger tying option. [3] X Research source
The figure 8 tie is a good choice for both horizontal and vertical rebar intersections. [5] X Research source
The added twist around the lower piece of rebar helps to keep it from sliding up or down against the upper piece of rebar. [7] X Research source
Once you tighten this tie, both pieces of rebar will remain securely connected in nearly all conditions.
This is the best option if you want to build a rebar framework on the ground and then hoist it into a vertical position. The wrap and saddle tie combo will keep the rebar intersections firmly in place.
A battery-powered twisting tool does the job with the push of a button, while a crank-powered tool requires you to pump the handle of the tool with one hand while holding it in place with the other. With the most basic option, the hand-powered twisting tool, you rotate the offset handle with one hand while steadying the tool with the other. Look for bag ties and twisting tools wherever rebar and related tools and equipment are sold.
Reef knots are also known as square knots. [13] X Research source Reef knots are a good choice for joining 2 pieces of wire that aren’t under tension—for instance, 2 lengths of fence wire that haven’t already been tightened.
The double love knot is also called a double overhand knot because it uses 2 overhand knots. While different in style from a reef knot, it’s similarly useful for connecting 2 pieces of wire that are not under tension. [15] X Research source
